6
S001961 4.5ft Trampoline
Assembly Instructions
Frame Assembly
Lay out the parts on a clear dry level surface as shown in Figure 1.
The T-Joints (B) should be placed between each Top Rail. Connect
the Top Rail (A) by sliding it into the T-Joints (B) to form the top rail
loop as shown in Figure 2.1.
Attention: make sure the two ends with a groove on the Top Rail
Tube (A) are facing down to the ground. See Fig. 2.2
To complete assembly of the Legs. Join the Leg Tube (C) to the Top
Rail and leave the hole without screw at this stage. The screw will be
used in later step when the skirting is connected as well.
Once completed, the frame of the Trampoline should look like
Figure 4.
