Action Sports S001049, Manual

Page: 19 / 32

©
ACTION SPORTS EQUIPMENT PTY LTD – www.actionsports.com.au Page: 19
Figure 4: With 2 people, lift middle section constructed in figure 3 and
connect as shown to base section. Do not add nuts or bolts at this point.
Figures 5 & 6: Slide the Fort
Enclosure Net (B32) over top of
frame as shown.
Figure 7: With one person holding the fort
jumping mat (B25), position mat so that support
loops on the mat overlap the loops at the base of
the fort enclosure net as per illustration. Add
Fort platform support tubes D63 (x4) to each
side, threading the support tube through the
loops of both the enclosure net and the jumping
mat as shown. On all four sides, add (F5) bolt
and nut x 8 for the upper holes on the middle
main frame tube D62.