Freecall
for
service
1-800-465-070
www.actionsports.com.au
BELT ADJUSTMENT
If during use you notice that walking belt either shifts to the right or the left of center, first remove
"Safety Key" and unplug equipment from AC power source. Using M6 Allen wrench provided,
turn left rear roller adjustment as indicated below clockwise no more the 1/4" of a turn. Remove
M6 Allen wrench, insert "Safety Key" and insert AC power cord into AC outlet. Turn on your
treadmill and observe after running a few minutes to see if problem has been corrected. This
may take several adjustments, so repeat the above procedure.
INCLINE ADJUSTMENT
There are 3 incline positions. Using your hand to raise the rear roller, then position the incline at
desired position
Adjustment
11
