2.
Advanced Features
Adjusting idle & full speed sounds
Setup
Only enter the setup if you need to change the idle &/or full throttle
speeds.
First of all make a backup of the files on the SD memory card supplied with
your P110. The file that is changed in the setup process is “settings.fil”
copying this file back to the memory card from your backup will restore
your P110 to its default setting.
Setup requires a receiver to be connected to the Channel 1 throttle input
(P2), the SD card inserted, & there needs to be a “run.wav” file holding the
engine sound.
Power up the P110 in the normal way, but as the LEDs are flashing Pressing
either button A or B & the P110 will enter setup. If no button is pressed the
LEDs are switched off and the P110 starts normal operation.
The P110 flashes the green LED slowly. Set the throttle to the maximum
position and press button A to confirm the maximum position has been set
on the throttle. The LED changes to alternating red and green
Press button B to move onto the next stage. If you wish to change the
maximum throttle position, set the stick accordingly and press button A
again then press button B to move to the next stage.
