•
The height of the frame carrying the sleeping surface can be adjusted from 33 cm to 76 cm by
continually pressing the button with the symbol and lowered by continually pressing the
button with the symbol
The back section can be adjusted to an angle between 0° up to maximum 71° by continually
pressing the button with the symbol and lowered by continually pressing the button with the
symbol
The leg rest can be adjusted to an angle between 0° and 25° by continually pressing the button
with the symbol and lowered by continually pressing the button with the symbol
With the bed in the sleeping position continually press the button with the symbol the bed will
start raising both the backrest and knee break and then start to tilt forwards until the bed is in
the semi chair position. Release the button and press again, the leg section will lower to the floor
creating a full chair position and stop.
With the bed in the chair position continually press the button with the symbol the sleeping
platform will start to tilt backwards whilst raising the leg section. Once the tilt function stops the
operator can lower the back rest and leg section to the desired sleeping position.
The bed can be lowered at the head end and raised at the foot end known as the Trendelenburg
position by pressing the button with the symbol this can help when pushing yourself up the
bed.
