Click n Go Green House America Quick Starter Guide – V1.0
6
4.3
INSTALLING BATTERIES AND ANTENNA
To install the bageries, you need to remove the 4 screws.
Once the baceries are plugged, the device will automa,cally start a Join Request to the
network.
Please make sure to be close enough to make a successful Join Request
To install the antenna, simply mount it on the device.
4.4
DEVICE INSTALLATION
The Elsys ELT-1 is equipped with 2 hole and can be mounter on any loca2on.
4.5
DEFAULT DEVICE CONFIGURATION
The device comes fully configured and ac2vated. Therefore, you do
not need to send any Device Key
informa2on to your ThingPark Wireless account. It is configured in Over The Air Ac2va2on mode (OTAA).
The device is aiming to send a message every 10mn.
4.6
BATTERY LIFE CALCULATOR
Elsys is providing a very nice calculator to es2mate the bagery life 2me of the device.
hgps://www.elsys.se/en/elt-1/
Based on the default configura2on the es2mated bagery life is expected for 18 years for & device working at
SF7.