![ActiGraph wActiSleep+ User Manual Download Page 11](http://html.mh-extra.com/html/actigraph/wactisleep/wactisleep_user-manual_2842849011.webp)
www.theactigraph.com
P a g e
|
11
49 E. Chase St. Pensacola, FL 32502 tel 850.332-7900 fax 850-332-7904
Data Summary
A new feature being introduced with the wGT3X+ and wAc is data summary. This feature
provides a wireless mean to rapidly tell information about the subject data. Daily and cumulative totals
are provided for counts, steps, and cut points. Additionally, a non-sedentary value is presented in order
to allow the researcher to rapidly gain insight into subject wear time/compliance.
Battery
All ActiGraph devices use a lithium ion rechargeable battery that has a maximum voltage of
approximately 4.20 volts. At 3.1 volts the devices enter a low voltage mode state (HALT mode).
In order to slow the aging of the Lithium Ion battery, it is recommended that devices be stored in a
partially charged state (40 – 60% battery capacity) in low ambient temperatures. Table 4 demonstrates
the impact of storage temperature and charge state on battery long term capacity.
Table 4 - Lithium Ion Storage
Note: If a computer is not available or if multiple devices need to be recharged, a
self-powered USB hub can be used.
IMPORTANT: ActiGraph’s devices do not come fully charged from the
manufacturer and recommend the units be charged fully before their initial use.