Hardware Manual
Installation Procedures
This section describes procedures in mounting the camera on a flat surface.
NOTE:
The camera images on this documentation are for reference only and may be different
from the actual camera.
Step 1: Prepare for Installation
1.
Before installing the camera, prepare other accessories required for installation. In case of
using a memory card for local recording, open the bottom cover of the camera and insert the
memory card.
NOTE:
Do not hot plug the memory card after it has been inserted and the power turned on,
otherwise, the camera or the card might be damaged.
2.
Determine whether the cable will go through a hole on the surface or be routed along the
surface. Note also the direction to which the cable will be routed to attach the bundled drill
template on the surface according to the direction of the cable.
Micro SD card slot
