ACTi VMGB-370, User Manual, Page: 26 / 74

www.acti.com
VMGB-
370 User’s Manual
26
Event and Alarm
This part introduces the configuration of events. The device takes certain response to triggered
alarm.
Set Motion Detection
It helps to detect the moving objects in the detection region and trigger the linkage actions.
1. Go to Configuration
→
Event
→
Basic Event
→
Motion Detection .
2. Select the channel No.
3. Check Enable Motion Detection .
4. Optional: Highlight to display the moving object in the image in green.
1) Check Enable Dynamic Analysis for Motion .
2) Go to Configuration
→
Local .
3) Set Rules to Enable .
5. Select Configuration Mode , and set rule region and rule parameters.

For the information about normal mode, see Normal Mode .

For the information about expert mode, see Expert Mode .
6. Set the arming schedule and linkage methods. For the information about arming
schedule settings, see Set Arming Schedule . For the information about linkage
methods, see Linkage Method Settings .
7. Click Save .