background image

 

1-2

1.2  Features and benefits 

The video transcoder is a high resolution, Ethernet (LAN and WAN) ready 

digital video transcoder. Via an Ethernet network such as LAN or WAN, 

the video transcoder takes a MPEG-4 stream from our IP camera or video 

server, and converts it in real-time with high quality analog video signals. 

This allows analog video devices such as TV system, analog monitors or 

existing analog video switches to be connected to our IP-base surveillance 

video system.   

z

 

Up to full D1 MPEG-4 video decoding 

The video transcoder can convert network MPEG-4 stream into analog 
video signals. It also can automatically detect the remote stream format, 
resolution and video standards. With ASIC based hardware decoder 
inside, this video transcoder is capable of decoding video at full frame 
rate (30/25 fps). The analog video resolution of more than 500 TV 
lines (depends on quality of video source) 

z

 

Supports regular TV sysytem and analog monitors 

The video transcoder does not support composite video only, it also 
supports Y/C video output. This feature allows analog video devices 
such as regular TV sets, analog monitors and existing analog video 
switches to be connected to our IP surveillance video system. 

z

 

QoS Enabled (L2,L3) Video Streaming (Unicast/Multicast) 

For real-time video streaming requirements, the video transcoder 
implemented the 802.1pQ features inside the SoC as the streaming 
engine to make sure the video streaming package is forwarded faster 
than normal TCP/UDP packet. 

z

 

Digital Time Code Embedded 

The “Digital Time Code Embedded” function is to embed the 
recording time in the MPEG bit stream. Therefore, each image frame 
has its respective time when it was recorded. It is very useful when 
users want to find the video at an exact time or between a certain time 
intervals. 

z

 

Build-in LAN and WAN (Low Latency PPPoE Supported) Ports 

The video transcoder provides two RJ-45 connectors. One is WAN and 
the other is LAN. The WAN port connects to the internet and LAN 
port connects to the local network. Since the internet’s bandwidth is 

Summary of Contents for SED-3320
















Reviews: