1-2
1.2 PHYSICAL DESCRIPTION
Read the following information to familiarize yourself with the video transcoder, and
make particular notes of where the connectors and LEDs are located.
Front Panel
1. Red
LED
LED Indicating Power or H/W Reset Function
2. Yellow
LED
LED Indicating when RS-485 Rx is active
3. Green
LED
LED Indicating when RS-485 Tx is active
4. Reset
Button
Get back to default value while forgetting Login Name & Password
Procedure
1.
Switch off the video transcoder by disconnecting the power cable
2.
Using a suitable pointed object, press and continue to hold the Reset Button
depressed. While continuing to hold the Reset Button depressed, reconnect
the power cable.
3.
Keep holding the Reset Button depressed around 6 seconds, release the
Reset Button. The unit will start up with the factory default settings.
