ACTi SED-2600 User Manual Download Page 6

 

1-5

1.2  Features and Benefits 

The Video server is a cutting-edge digital video transmission device. It can 

compress and transmit two channels of real time images with outstanding 

images quality (D1, 720x480) at reasonable bandwidth through a standard 

TCP/IP network. This video server also provide two-way audio streams 

along with each video channel. That’s because it is Ethernet ready and has 

the powerful ARM9 SoC and the MPEG-4 compression ASIC inside. In 

addition, with these powerful hardware platform, excellent SDK support 

and powerful respective apparatuses (eg. the transcoder), this Video server 

is your best choice building up either conventional IP surveillance system or 

intelligent IP surveillance system. 

z

 

Real-time MPEG-4 Compression 

With hardware MPEG-4 compression chip inside, the composite video 
inputs can be efficiently compressed into MPEG-4 bit stream without 
any delay. The ASIC base compression engine can support not only 
CIF, but also FULL D1 image resolution. 

z

 

QoS Enabled Video Streaming 

For real-time video streaming requirements, the Video server 
implemented the 802.1pQ features inside the SoC as the streaming 
engine to make sure the video streaming package is forwarded faster 
than normal TCP/UDP packet. 

z

 

Automatic Frame Rate Control 

The Video server supports automatic/manual streaming frame rate 
control, especially for multiple clients concurrent access the same 
video stream in different network bandwidth. 

z

 

Digital Time Code Embedded 

The “Digital Time Code Embedded” function is to embed the 
recording time in the MPEG bit stream. Therefore, each image frame 
has its respective time when it was recorded. It is very useful when 
users want to find the video at an exact time or between a certain time 
intervals. 

z

 

Build-in Low Latency PPPoE Supported 

The Ethernet port is equipped with a low latency PPPoE 
(Point-to-Point over Ethernet) which has excellent transmission speed 
and enables the Video server to connect to an ADSL or a cable 

Summary of Contents for SED-2600













Reviews: