1.2 PHYSICAL DESCRIPTION
Read the following information to familiarize yourself with the video server, and make particular
notes of where the connectors and LEDs are located.
Front Panel
1.
Red
LED
LED indicating Power or H/W Reset Function
2.
Yellow
LED
LED indicating when RS-485 is active
3.
Green
LED
LED indicating when LAN/WAN is active
4.
Reset
Button
Get back to default value while forgetting Login Name & Password
Procedure
1.
Switch off the video server by disconnecting the power cable
2.
Using a suitable pointed object, press and continue to hold the Reset Button depressed.
While continuing to hold the Reset Button depressed, reconnect the power cable.
3.
Keep holding the Reset Button depressed around 6 seconds, release the Reset Button.
The unit will start up with the factory default settings.
5.
Terminal Blocks Pin 1~6
PIN
NAME
DESCRIPTION
1
DO1
Digital Output 1
2
NC
Non Connector
3
GND
Ground Pin
4
DI1
Digital Input 1
5
NC
Non Connector
6
GND
Ground Pin
