www.acti.com
CONFIGURATION GUIDE
3
Part two: Settings of Camera
Please refer to the following figure for the People counting setting:
1. Click
“Configuration”.
2. Click
“People Counting”.
3. Click
“Rule”.
4.
Make sure “Enable People Counting” has been checked.
5.
Adjust “Auto” to “Manual”.
6. Enter the ceiling height
(from the floor) and click “Calibration”.
7. Adjust the detection area and the detection line as the picture below.
*Note:
The detection lines should be drawn on the same level (There
should be no unevenness on the detection line)
