www.acti.com
Hardware Manual
15
Step 3: Route the Cables
Determine whether the cable will pass through a hole on the surface or be routed along the
surface:
If the cable will pass through a hole on the surface
:
1. Drill the hole for the cable on the surface.
2. Route the cable from the network side through the hole and connect it to the Ethernet port of
the camera.
3. Push the cable through the hole on the surface.
If the cable will be routed along the surface
1. Cut off the marked tab on the dome cover and the camera body.
Drill cable hole
within this block.
