www.acti.com
Hardware Manual
11
Mounting Solutions
There are several mounting options that you can use to install the camera. Select the most
suitable solution for your installation environment.
Mount Types
Accessories
Flush Mount
Use the bundled flush mount to install the camera behind the surface of wall
or ceiling. Only the lens can be seen outside the surface. See
on page 13.
Tiltable Flush
Mount
Suitable if the camera is required to be tilted to acquire the desired viewing
angle when mounted on high walls or ceiling. The tiltable flush mount is
available for purchase. Installation procedures are covered in the
Installation Guide downloadable from the website
http://www.acti.com/mountingselector
Bracket Mount
Suitable for mounting on a hard surface, such as an enclosure or ceiling or
wall made from cement, wood, or metal. Common application will be inside
an ATM machine. The bracket is available for purchase. Installation
procedures are covered in the Installation Guide downloadable from the
website (
http://www.acti.com/mountingselector
).
Corner Mount
Suitable when mounting the camera on corner walls, like an elevator,
hallway, etc. The camera is tilted 20
°
to capture a larger viewing angle
below the camera and less on the ceiling. The corner mount is available for
purchase. Installation procedures are covered in the Installation Guide
downloadable from the website (
http://www.acti.com/mountingselector
).
NOTE:
For more information about the mounting solutions and accessories, please check the
in our website (
http://www.acti.com/mountingselector