manualshive.com logo in svg

ACTi PCDK Camera Demo Kit, Product Manual

The ACTi PCDK Camera Demo Kit is a cutting-edge product designed to enhance your security surveillance capabilities. Featuring advanced technology and high-resolution cameras, this kit provides exceptional video quality. Now, you can easily harness the full potential of this powerful system by downloading the free product manual from our website.

Share
Download
background image

www.acti.com

 
 

User Manual 

                 

9 

How to Use the Demo Kit? 

Step 1: Open the Demo Kit 

1.

 

Place the demo kit on an even surface. 

 

2.

 

Release the six (6) latches surrounding the demo kit. 

   

 

 

   

 

 

3.

 

Lift to remove the cover. 

   

 

NOTE:

 Use the space for camera to place your camera inside the demo kit for easy 

transport. The camera is not included upon purchase of the demo kit. 

 

Space for Camera 

Summary of Contents for PCDK Camera Demo Kit























Reviews:

No comments

Related manuals for PCDK Camera Demo Kit

ZKTeco F300 Installation Manual preview
F300
Brand: ZKTeco Pages: 8
Wavetronix Click 512 Quick Start Manual preview
Click 512
Brand: Wavetronix Pages: 4
wavestore WV-CT-4F Installation Manual preview
WV-CT-4F
Brand: wavestore Pages: 11
X-10 Pro 2000 Installer'S Manual preview
Pro 2000
Brand: X-10 Pages: 32
Rogers Smart Home Monitoring Quick Start Manual preview
Smart Home Monitoring
Brand: Rogers Pages: 20
E-line ELI-IP5-APTZ21-30X User Manual preview
ELI-IP5-APTZ21-30X
Brand: E-line Pages: 38
ELRO FW380111R Instruction Manual preview
FW380111R
Brand: ELRO Pages: 2
Vicon SurveyorVFTXX134-60-01 Quick Manual preview
SurveyorVFTXX134-60-01
Brand: Vicon Pages: 23
RED SHIELD SMART HALO User Manual preview
SMART HALO
Brand: RED SHIELD Pages: 25
Soca ST-660 Operation And Installation Manual preview
ST-660
Brand: Soca Pages: 19
wavestore Vision WV-8S-180-AI Installation Manual preview
Vision WV-8S-180-AI
Brand: wavestore Pages: 12
COMPOLOGY SkyCamera Installation & Setup Manual preview
SkyCamera
Brand: COMPOLOGY Pages: 4
DSE RE-TCC5E Owner'S Manual preview
RE-TCC5E
Brand: DSE Pages: 2
DÖRR DAF 42 Instruction Manual preview
DAF 42
Brand: DÖRR Pages: 64
MetalTech I-CISGRJP Assembly Instructions Manual preview
I-CISGRJP
Brand: MetalTech Pages: 12
Dahua DH-IPC-HF8835FN Quick Start Manual preview
DH-IPC-HF8835FN
Brand: Dahua Pages: 20
Veilux VP-AT18X Installation And User Manual preview
VP-AT18X
Brand: Veilux Pages: 47
Interlogix TruVision TVD-6120VE-2 User Manual preview
TruVision TVD-6120VE-2
Brand: Interlogix Pages: 20

Brands by name

Popular brands

Load more brands