![background image](http://html1.mh-extra.com/html/acti/mpeg-4/mpeg-4_manual_2842443002.webp)
as a PC frame capture card) or software required. The camera
supports DirectX 9.0; therefore, the only requirement you need
is the web browser software such as Internet Explorer 5.0 or above.
Once you have a valid IP Address, just connect it and you can view
the picture and receive sound from your camera. In addition, the
camera’s stand allows you to adjust the camera for optimal
viewing angle. You can tilt the camera right or left (up to +90/
-90 degrees), up or down (up to +90/0 degrees).
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference
by one of the following measures:
● Reorient or relocate the receiving antenna.
● Increase the separation between the equipment and receiver.
● Connect the equipment into an outlet on a circuit different