![background image](http://html1.mh-extra.com/html/acti/mnr-320p/mnr-320p_quick-installation-manual_2842789005.webp)
Quick Installation Guide
5
CONNECT THE DEVICES
5
The example below displays a local network consisting of an MNR, network
cameras and required peripherals.
Power Source
Network
Camera
Network
Camera
MNR
USB Devices
Monitor
1. Use at least four (4) screws appropriate for the surface where you will install
the MNR in the vehicle.
2.
Install the network camera(s).
3. Connect the camera(s) to the PoE port of the MNR using network cables.
NOTE:
The total power budget of the MNR is 30.8 watts. Note that if there are four (4)
cameras connected, each PoE port provides 7 watts power to the camera. Check the
camera specifications to ensure the camera power input matches the MNR.
4. Connect the USB devices and other optional input/output devices to the
MNR.
5.
Connect the MNR to the power source.
INSTALL OPTIONAL MODULES
To fulfill certain project requirements, contact ACTi sales representatives to
purchase the following optional modules:
•
Wireless Module - provides Wi-Fi connectivity
•
3G / 4G Module - provides 3G / 4G connectivity
Refer to the instructions in the Installation Guide to install the optional
modules and use the software utilities provided to complete the initial setup.
4