Standalone NVR Quick Installation Guide
5
START-UP
1. On the front panel, press the
Power Button
to turn on the unit.
2. On the Windows login screen, follow the on-screen instructions to setup
your login password. This will be used in succeeding Windows login. It is
strongly recommended not to leave the password blank.
CONNECT THE DEVICES
The example below displays a network consisting of only INR, network cameras
and required peripherals. Please remember to enable the DHCP service on your
router for INR to obtain an IP address automatically.
Note
To assign a static IP address to INR, enter Windows
and configure the network settings in
Network
and Sharing Center
.
Power Source
USB Devices
Monitor
Switch
Cameras
