www.acti.com
Hardware Manual
9
Physical Description
No.
Item
Description
1
Power LED
The Power LED lights red when the camera is powered up and
goes off when the boot up process is complete.
2
Reset Button
The reset button is used to restore the factory default settings
of the camera, including the administrator
’s password.
To reset the camera, do the following: Press and hold the reset
button for at least 5 seconds or until the Power LED turns on.
3
Memory Card Slot
Insert a memory card into this slot for local recording purposes.
Insert the Memory Card (Optional)
on page 13
for more
information.
NOTE:
Supports microSDHC cards only.
4
Audio Output
This jack connects to an audio output device, such as a
on page
5
Audio Input
This jack connects to an audio input device, such as a
microphone with built-in amplifier. See
on page
NOTE:
Make sure that the connected audio input device has a
built-in amplifier. Connecting an ordinary microphone will dwarf
sounds and will result in inaudible recording.
