www.acti.com
Hardware Manual
7
Physical Description
OR
D61, D62, E66, E67, E68
D64, D65, E61, E62, E63, E64, E65, E69
1) Reset Button
The purpose of reset button is to restore the factory default settings of the camera, including
administrator
’s password.
The reset button can be used for following purposes:
1. The administrator
’s password has been forgotten and therefore the camera cannot be
accessed.
2. In case of IP address, mask, or allow/deny filter related issues, resulting with inability to
modify these settings.
3. In case of connectivity issues or abnormal video quality.
How to do the reset properly?
Step 1:
Disconnect the power supply (e.g. disconnect the Ethernet cable with PoE).
Step 2:
Press and continue to hold the Reset Button (using a pin).
Step 3:
Connect the power supply while keeping the Reset Button pressed.
Step 4:
Wait for 45 seconds and release the Reset Button.
2) MicroSDHC Card Slot
This slot only supports MicroSDHC standard. Do not use the MicroSD standard card. The card is
not included. For more information about how to operate with MicroSDHC card, please refer to
the Firmware User Manual.
3) Ethernet Port
The IP device connects to the Ethernet via a standard RJ45 connector.
