www.acti.com
Hardware Manual
8
Physical Description
1)
Memory Card Slot
Insert a memory card (not included) into this slot for local recording purposes. See
How to
Install / Remove the Memory Card
on page 22 for more information.
NOTE:
Supports microSDHC and microSDXC cards.
2)
Reset Button
Use the Reset Button to reset the camera to its factory default settings. To do the reset,
press and hold the Reset button for at least 5 seconds or until the Power LED lights up.
When the Power LED lights up again, reset is complete. See
How to Reset the Camera
on page 24.
3)
Power LED
The Power LED lights up when the camera is connected to the power source and goes off
once the camera boot-up process is complete.
NOTE:
For typical use, the power LED is hidden inside the housing and cannot be seen.
However, knowing how the power LED works is essential when troubleshooting or doing a
reset.
4)
Ethernet Port
Connects to a network using an Ethernet cable.
VoIPon www.voipon.co.uk [email protected] Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
