www.acti.com
Hardware Manual
9
Physical Description
Item
Description
1
Serial Port
This port connects to serial devices via RS-485 or
RS-422 protocols. Use the supplied serial port
terminal block to connect the wires from the serial
device to the camera.
How to Connect a Serial Device
on page 25
for connection details.
2
Ethernet Port
Connects to a network using an Ethernet cable.
3
Memory Card Slot
Insert a memory card into this slot for local
on page 27 for more
information.
NOTE:
Supports microSDHC and microSDXC
cards.
4
Reset Button
Restores the factory default settings of the
camera. Resetting the camera must be done while
the power is on. Using a pointed object, such as a
paper clip, press and hold the
Reset Button
for at
least 5 seconds or until the Power LED goes off .
5
Power LED
The Power LED turns on when the camera is
powered on and the system is running.
