www.acti.com
Hardware Manual
24
How to Connect Audio Devices
Audio input / output devices, such as an active microphone or speaker can be connected to the
camera using the supplied terminal block.
Press and hold the orange tab as you insert the wire through the pin slot, then release the orange
tab to secure the wire.
To connect audio devices, map the pins to one of the pin combinations below:
Device
Pin
Mapping Instructions
Audio Output (AO)
AO GND
Connect the wires of the audio output device to
AO
GND
and
AO
.
AO
Audio Input (A1)
AI GND
Connect the wires of the audio input device to
AI
GND
and
AI
.
AI
NOTE
:
For more information about AUDIO in connections, please refer to the Knowledge Base
How to Use Audio-in of ACTi Cameras
downloadable from the link below
http://www.acti.com/support/KnowledgeBase/outside/detail.asp?KB_ID=KB20100114003
For Audio Use
