www.acti.com
Hardware Manual
16
6.
Tighten the knurled knob to fix the camera position.
Step 4: Connect the Cable(s)
1.
Connect the network cable to the Ethernet port of the camera.
2.
If necessary, connect a power adapter to the camera. See
on page 19. Connect audio input/output or DI/DO devices to the camera. See
How to Connect DI/DO and Audio Devices (Optional)
on page 21.
3.
In case of using a non-PoE switch or your PoE switch has limited power supply, you can
purchase a power adapter and directly connect the camera to a power outlet. The power
adapter must be connected to the supplied terminal block before use.
To do this, follow the procedures below:
1.
Loosen the screws of the
12V
and
GND
pins of the power terminal block.
