![background image](http://html1.mh-extra.com/html/acti/cms-100/cms-100_quick-installation-manual_2842770009.webp)
Quick Installation Guide
9
3. Double-click the Edit icon
of the pre-defined event rule to configure the
settings.
4.
Configure the response you want CMS to do when the event is triggered,
such as sound a beep or alarm sound, send a notification email, or execute a
command.
5. Click
Apply
.
SET EVENT RULES
11
There are default Event Rules on the CMS. Once an event is detected on a
device, the NVR client and CMS can both be notified at the same time. To enable
the event rule, do the following:
1. On the
Setup
page, click the
Event
tab.
2. Select the device tab and then the device from the menu list on the left panel.