1-4
camera will gets the power from the first power input plugged into
it.
7.
Analog Video Output
The IP camera supports one channel analog video output.
8.
LAN port
The IP Camera connects to the LAN (local area network) via a
standard RJ45 connector. Supporting NWAY, this IP camera can
auto detect the speed of local network segment
(10Base-T/100Base-TX Ethernet).
With PoE built-in product, you can power the IP camera via
WAN port, LAN port or DC input. You can power the IP camera
with multiple power inputs at the same time. If you do, the IP
camera will gets the power from the first power input plugged into
it.
NOTE:
You may find a support package for help you getting familiar
with PoE. Please visit our web site, and get the support document
TS-00040.
9.
Reset Button
Step 1:
Switch off IP camera by disconnecting the power cable
Step 2:
Using a suitable pointed object, press and continue to hold the
Reset Button depressed. While continuing to hold the reset button
depressed, reconnect the power cable.
Step 3:
Keep holding the reset button depressed around 6 seconds,
release the reset button. The unit will start up with factory default
settings.
10.
Action LED Indicator
The LED will light up after IP camera has successfully completed
the boot process.
11.
DI/O
The IP Camera supports one alarm input and one alarm output.
DI:Logic Level 0: 0~0.4V; Logic Level 1: 3.3~30V
DO:Logic Level 0: 0.1~0.6V; Logic Level1: 2.4~5V
NOTE:
You may find a support package for help you getting familiar
with PoE. Please visit our web site, and get the support document
TS-00040.