0-2
1.2 PHYSICAL DESCRIPTION
ACM-3601 ACM-3603
1.
The LED will indicate ethernet speed and active states after IP
camera has connected completely.
Ethernet Indicator LED
2.
The LED will light up after IP camera has successfully completed
the boot process
Power LED
3.
Step 1:
Switch off IP device by disconnecting the power cable
Step 2:
Press and continue to hold the Reset Button. Reconnect
the power cable while continuing to hold the reset button.
Step 3:
Keep holding the reset button depressed around 16
seconds, release the reset button. The unit will start up with
factory default settings.
Reset Button
