0-4
1.3 BASIC CONNECTIONS
Follow the procedures below to connect the IP Indoor CMOS Bullet
Camera to the respective apparatuses.
1.
Connect an analog monitor to IP Indoor CMOS Bullet Camera video out
(BNC connector).
2.
Connect the power adaptor to IP Indoor CMOS Bullet Camera
3.
Connect IP Indoor CMOS Bullet Camera’s ethernet port to an Ethernet
(RJ45 connectors). If your IP Indoor CMOS Bullet Camera has PoE
built-in, you can regard it as a PD and connect it directly to a PSE device
like PoE switch.
4.
Connect a PC to the Ethernet hub (RJ45 connectors)
1
NOTE:
You may find a support package for help you getting familiar
with PoE. Please visit our web site, and get the support document
TS-00040.
