background image

 

0-1

 

0

 

PRECAUTIONS 

 

1.

 

Read these instructions

 

All the safety and operating instructions should be read before the product is 

operated. 

2.

 

Heed all warnings 

       

All warnings on the product and in the instruction manual should be adhered to. 

 

The symbol indicates the following items, please carefully read the 

description next to each symbol. 

a.

 

Failure to follow the safety instruction given may directly endanger 

people, cause damage to the system or to other equipment.   

b.

 

The requirements to make this device work, including hardware, 

computer settings, network settings, and operation procedures. 

c.

 

The tips to make using this device easier, more convenient and more 

efficient. 

3.

 

Servicing  

     

  Do not attempt to service this video product yourself as opening or removing 

covers may expose you to dangerous voltage or other hazards. Refer all servicing 

to qualified service personnel.

 

Trademarks 

All names used in this manual for hardware and software are probably registered 

trademarks of respective companies.   

Liability 

Every care has been taken during writing this manual. Please inform your local office 

if you find any inaccuracies or omissions. We cannot be held responsible for any 

typographical or technical errors and reserve the right to make changes to the product 

and manuals without prior notice.   

FCC/CE Regulation 

NOTE: This equipment has been tested and found to comply with the limits for a 

Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are 

designed to provide reasonable protection against harmful interference when the 

equipment is operated in a commercial environment. This equipment generates, uses, 

 

Summary of Contents for ACD-2100
















Reviews: