www.acti.com
Hardware Manual
10
Installation Procedures
Step 1: Install the Camera
1. Mark the screw holes or attach the bundled drill template on the target surface.
NOTE:
Depending on the surface where you will install the camera, it may be necessary to
drill four (4) holes and use the supplied screw tox.
2.
If the cable will pass through the surface
, drill the cable hole as indicated on the drill
template.
If the cable will be routed along the surface,
route the cable through the gap
on the bracket. For outdoor installations, you may need to purchase the optional junction
box to protect the cables, contact ACTi Sales for details.
3. Mount the camera to the surface using four (4) screws.
4. Loosen the screw to tilt, pan, or adjust the camera orientation.
