www.acti.com
Hardware Manual
22
How to Reset the Camera (A41~A47 only)
The camera has a
Reset
button that can be used to restore the camera to its factory default
settings when the need arises.
The
Reset
button is used for the following purposes:
The administrator’s password is forgotten and therefore the camera cannot be accessed
In case of IP address, mask, or allow/deny filter related issues, resulting with the inability
to modify these settings
In case of connectivity issues or abnormal video quality
Perform the following to reset the camera to its default settings:
1.
Disconnect the camera from its power source (either by PoE or DC power).
2.
Press and hold the
Reset Button
and re-connect the power source to the camera.
3.
Continue pressing the
Reset Button
until the green Ethernet LED lights up or press for at
least 20 seconds.
