Connecting Acterna TestPad 2000
TM
with the
BAT Module
• The Acterna TestPad 2000
TM
may contain another applica-
tion module. If so, remove that other module.
• Slide the BAT Module into the Acterna TestPad 2000
TM
.
• Tighten the screw with a coin.
• Power on the TestPad.
• The application software will be downloaded from the BAT
Module (this will take a few minutes).
• Your BAT starts operation and is ready for use.
Please read the following pages carefully and do not forget
to charge the battery before going out in the field!
