2. Hyperterminal is a serial communications application that is
distributed with Windows. On the PC, navigate to “Start -> Programs
-> Accessories -> Communications -> Hyperterminal” to start
Hyperterminal. Create a new session, and connect using the COM
port from step 1. The other settings are: 57600, 8, None, 1, None.
3. Press and release switch SW3 on the M1AFS board to reset the
software and see the display of analog measurements on the
Hyperterminal window.
For additional information, please refer to the
Cortex-M1 Enabled Fusion
Development Kit User’s Guide
For support please contact SoC Solutions at
For product updates, please register this product at
http://www.socsolutions.com/ProdRegistration.aspx
Copyright 2008 ©. All rights reserved. All logos and trademarks are property of the respective
companies.
Cortex-M1 Enabled Fusion
Development Kit
Quick Start Guide
M1AFS-DEV-KIT-SCS
M1AFS with
Cortex-M1 processor
1Mbyte
SRAM
16Mbyte
Flash
USB / Serial
Connector
USB Connector
(FlashPro3
Programmer)
LEDs
Switches
In the box…
•
M1AFS Development Board
•
Install CD
•
Libero IDE (CD/DVD)
•
2 USB Cables
•
1 External 5-Volt Power Supply
Version 1.1 March 2008
