Step 5. Running the
Swif
Trax
monitor
On the PC start the
Swif
Trax
monitor by going to the
CD:\Actel_AGL\Preloaded Design\Software\SwifTrax
folder and double clicking on the
SwifTrax
.exe
file.
The
Swif
Trax
monitor can now be used to read and write register and
memory locations on the pre-loaded design. The pre-loaded design is SoC
Solutions’ PiP-EC02 platform. For more information, see PiP-EC02
documentation under the
Available IP
folder or contact SoC Solutions
for details.
For additional information, please refer to the
IGLOO
Development Kit User’s Guide
For support please contact SoC Solutions at
.
For information on additional products for the IGLOO Development Kit,
please contact
.
Copyright 2007 ©. All rights reserved. All logos and trademarks are property of the respective companies.
IGLOO
Development Kit
Quick Start Guide
In the box…
•
AGL Development Board
•
AGL Development Kit Install CD
•
Libero IDE (CD)
•
2 USB Cables
IGLOO FPGA
with example processor
subsystem
1Mbyte
SRAM
16Mbyte
Flash
USB / Serial
Connector
USB Connector
(Flash Pro3
Programmer)
LEDs
Switches
AGL-DEV-KIT-SCS
AGL Development Board
Flash*Freeze
Switch
