50200178-1/10.09
FlashPro3 Device Programmer Quickstart Card
Common Issues
If the On LED does not light up after FlashPro3 driver installation, the driver might not be installed
correctly and you must troubleshoot the installation. For more information, refer to the
FlashPro
Software and Hardware Installation Guide
and the “Known Issues and Workarounds” section of the
FlashPro software release notes:
www.actel.com/download/program_debug/flashpro
Documentation Resources
For further FlashPro software and FlashPro3 device programmer information, including user's
guide, installation guide, tutorial, and application notes, refer to the FlashPro software page:
www.actel.com/products/hardware/program_debug/flashpro
FlashPro3X Technical Description
FlashPro3X is an ISP programmer you can use with your PC to program IGLOO®, ProASIC3®L,
ProASIC3, and Fusion devices. FlashPro3X enables changing the TCK mode to discrete, which
enables JTAG programming for non-compliant JTAG devices to be included in the JTAG chain
with the Actel device. FlashPro3X includes all FlashPro3 functionality.
Technical Support and Contacts
Technical support is available online at
www.actel.com/support
, by email at [email protected], or by
phone:
Phone (NA): 800.262.1060
Phone (Int'l): +1 650.318.4460
Actel Sales offices, including Representatives and Distributors, are located worldwide. To find your
local representative go to:
