Notice
1.LINE IN :
Accepts 3.5mm stereo mini-plug input from Audio source.
2.Left speaker :
Accepts RCA input plug from left speaker.
3.Right
speaker :
Accepts RCA input
plug from right speaker.
4.Subwoofer Speaker :
Accepts RCA input plug form Subwoofer speaker.
5.POWER :
Turns power on/off
to the speakers system.
6.LED (Green) :
Displays when speaker is receiving power.
7.VOLUME :
Controls system volume level (Satellite and Subwoofer speakers).
8.BASS :
Controls speaker's bass level (Subwoofer).
9.DC IN
: Power input jack adapter DC 12V
Instruction for connecting the J-8902 Speaker
1-1. Subwoofer :
Output power :
12 W
Driver :
4"
Woofer
Load Impedance
4 Ohms
Power supply :
Input AC Power Adapter ,Output DC 12V/1.5A
Magnetically Shield :
Yes
1-2
.
Satellite :
Output power :
4 W X 2
Driver :
Full Range 2.5"
x 2
Load Impedance :
4 Ohms
Magnetically Shield :
Yes
2. Total Power (R.M.S.) :
20 W
3. Frequency Response :
50 Hz
~
20 KHz
4. Dimension (W x H x D) :
Subwoofer :
250 mm x 270 mm x 250 mm
Center box :
98 mm x 197 mm x 168 mm
Satellite :
103 mm x 87 mm x 103 mm
Specification
Package Contents
*Subwoofer
*Satellite Speaker x 2
*3.5mm stereo plug cable
*User Manual
CONTROL BOX
(Front)
CONTROL BOX
(Back)
Operating instruction for J-8902 Speaker System
1.Place the satellite speakers next to the monitor, one on either side. Place the
subwoofer next the speakers within reaching distance.
2.Plug the satellite speaker cables into the control box's left and right speaker output
jacks (2&3) .
3.Plug the audio input cable attached to the back of the control box's (1) into the
sound card or other audio source.
4.Before connecting the power cable, make sure the control box's power switch is
in the "off" or "out" position. Plug the power adapter cable into the control box's
power input jack (9). Plug the power adapter into a standard household electrical
outlet.
5.Press the control box's power knob (5) to turn on the system. The green LED Light
should illuminate.
6.Activate the audio the audio source to test speakers.
(English)
*
Power Adapter 12V/1.5A
1.Avoid exposing speakers to environments that are excessively warm and humid
(particularly in unventilated spaces or nearby heaters) or dusty.
2.Do not set speakers near windows exposed to direct sunlight or in areas prone to
water seepage.
3.Avoid excessive vibration of speakers.
4.Clean speaker housing by wiping with mild cleaning solution. Do not use solvents!
5.The speakers incorporate an efficient anti-magnetic architecture, permitting use in
close proximity to most television screens.If the use of your speakers cause
distortions in your television screen colors, try the following:
Turn off and unplug your television, turn on the speaker(s).After waiting 15 to 30
minutes, turn the television on and increase the distance between screen and
speakers until distortion disappears. Also, note whether other magnetic emission
sources are in the immediate vicinity. If so, relocate so as to prevent screen
distortion.
6. "!" WARNING : Before connecting or disconnecting any cables, make sure that
the speaker's power button is in the " OFF " position and the power adapter is
unplugged from the power source and not receiving power.
7.
All other brand and product names are trademarks or registered trademarks of
their respective holders.
8.All specifications subject to change without prior notice.
4
3
5.POWER
6.VOLUME
7. BASS
8. LED
1.LINE IN
3.Right speaker
9.DC IN
2.Left speaker
4.Subwoofer
