ACT ENTRY A10, Operating And Installation Instructions

Page: 6 / 12

6
ACTentry A10 Operating and Installation Instructions
0 Toggled
1 Timed
2 Timed
3 Timed Timed
4 Timed
5 Timed Timed
6 Timed Timed
7 Timed Timed Timed
ACTentry A10 Programming
Press the button followed by the programming code (initially 9999). The yellow LED will flash while
in programming mode. To exit the programming mode press button . Exit from programming mode
occurs automatically if no key is activated for 30 seconds.
Changing Codes:
(From programming mode)
Enter 0 (Change codes)
0-9, (user number 0-9, = programming code)
000000-999999 (4 or 6 digit code – 000000 deletes user)
Default user codes: Programming = 9999(99), User 1 =1234(56), All others inactive.
Setting switched output combinations:
(From programming mode)
Enter 1 (Set Outputs)
0-9 (User number 0-9)
0-7 (Output function code)
Output Function Code Door Output Door 2/Output 2 Output 3
Default function code is 1 (Relay Timed) for all users. When the door is toggled open, this will be
For example, to set user 1 to toggle the door open/locked:
Enter 1(set outputs), followed by 1(user1), followed by 0(Toggled). (e.g -9999-1-1-0- )
To set user 2 to open Door 2:
Enter 1(set outputs), followed by 2(user2), followed by 2 (Door 2 timed) (e.g. -9999-1-2-2- )
Setting timers:
(From programming mode)
Enter 2 (Set Timers
0-4 (Timer number) {Buzzer sounds indicating timing… wait required period}
(Stop timing) {Buzzer stops – timer set}