ACTSmart Operating and Installation Manual
Rev 1.1
- 9 -
Programming ACTSmart Options:
Step
Keypad Entry
Operation
1
30-41
Select Option Number
2
0 or 1
0=Off, 1= On
3 1-8,
(optional)*
Select each door this option is set for
4 Press
✔
End setting options
Option Function
Default Operation
30
Door Chime
Off
When set, whenever the door contact is opened, the built-in
buzzer makes a chime sound and the buzzer output activates for 2
seconds
31
Silent Operation
Off
When set, the keypad operates silently, that is no audible tones
(key-presses or confirm tones) are produced from the built-in
buzzer
32
Lock-saver
(Anti Tailgating)
Off
When set, and when the door relay is active (following a valid
code or button release), the door relay timer is truncated to 2
seconds when the door contact opens. This ensures that
irrespective of programmed relay time, the door will be locked as
soon as it closes, and any person following will have to enter a
code.
33
Toggle
Off
When set, the door relay toggles for each valid entry. The green
LED flashes when the door is toggled open.
34
Door Forced Alarm
On
When set, the buzzer output/ door alarm output is activated if the
door contact opens when the door is locked. The output is
deactivated when a valid card or PIN is next entered. This is
useful for monitoring fire doors etc.
35
Door Ajar Alarm
On
When set, and the door contact has been open for longer than the
time programmed into the door ajar timer, the buzzer output/ door
alarm output is activated. Closing the door and presenting a valid
card or entering a valid PIN deactivates the output.
36
Guest Button
On
When set, (default) and when the
✔
key on the keypad is pressed,
the buzzer output is activated for the duration programmed in the
guest buzzer timer.
37
Duress Codes
Off
When set, and when a duress PIN is entered, the door is opened
normally and the Door Alarm output activated. A duress PIN is
any valid PIN with one added to the last digit. The output will be
reset when a valid user is enters. When the duress option is set,
avoid using PINs that are different by 1.
38
Network Master
Off
Set
one
device on the network to be the Master.
39
Card and PIN
Off
When set, only Card and PIN users are admitted. This is only
valid for ACTSmart PIN and Prox units.
40 Card or PIN
Off
When set, either a valid Card or valid PIN will open the door.
This is only valid for ACTSmart PIN and Prox units.
41
Card and any PIN
Off
In this mode, a valid card and any valid PIN code will open the
door. This is only valid for ACTSmart PIN and Prox units. This
mode allows all users to have a common PIN code to use with
their cards.