manualshive.com logo in svg

ACT ACTpro MIFARE MF 1030e, Installation Manual

Share
Download
ACT ACTpro MIFARE MF 1030e Installation Manual Download Page 8

ACTpro MIFARE Readers Installation Manual

Copyright © 2016 Access Control Technology Ltd. Part No.18-00102 Issue 1

8

Reader Configuration

Operation: ACTpro MIFARE 1030PM / 1040e / 1050e

ACTpro MIFARE readers can operate in sector, serial or reverse serial 
mode which is selectable via a jumper. To change the operation mode 
power down the reader, change the jumper for the desired operation and 
re-apply power.

 

Operation: ACTpro MIFARE 1030e 

The operation of the ACTpro MIFARE 1030e is selectable via cable 
configuration. To change the operation power down the reader, change 
the Orange and Purple cable for the desired operation and re-apply 
power.

Sector Reader

The default sector reader operation reads a numbers encoded into 
Sector 1 of the MIFARE cards and fobs. The ACT MIFARE readers can 
be programmed to read any specified sector data. See section on reader 
re-programming.

Serial and Reverse Serial Reader

When in Serial or reverse serial mode the MIFARE card serial number 
(CSN) is read by the reader.

1

2

3

Sector

1

2

3

Serial

1

2

3

Reverse

Serial

Connect Pins 1&2

Connect Pins 2&3

Do NOT connect Jumper

Colour

Sector

Serial

Reverse Serial

Orange

0V

0V

Not Connected

Purple

0V

Not Connected

0V

Summary of Contents for ACTpro MIFARE MF 1030e

















Reviews:

No comments

Brands by name

Popular brands

Load more brands