ACT
pro
200
Product Overview
The ACTpro 200 is a two door expander for
the ACTpro 2000 and ACTpro 3000 controllers,
complete with built-in, monitored 3 Amp power
supply. The power supply supports two doors,
each with its own fuse and battery support.
On-board LEDs are provided for fault indication
and faults are reported to the controller and PC.
An 18swg mild steel cabinet provides ample
room for wiring and batteries, and the lid
will accomodate two ACTpro 100 pcbs.
Programme Features include:
2 door expander
3 Amp monitored PSU
Battery deep-discharge protection
Fuse blown LED indication
Mains fault indication
Supports 2 x 7AHr batteries
Accomodates 2 ACTpro 100 pcbs on lid
Supports entry/exit readers
Installation / Specification Guidelines
For indoor use only
The ACTpro 200 connects to ACT
controllers on the DOORS network
The ACTpro 200 is compatible with all versions
of ACTpro 2000 and ACTpro 3000 controllers
Up to 7 ACTpro 200s can be connected
to a controller
ACTpro 200 and ACTpro 100 may be connected
on the same network (maximum 16 doors,
including controller)
For details of the ACTpro 100 please see overleaf
2 Door Expander and 3amp Monitored PSU
Product Specification
Mains Voltage:
230V AC +10% - 15%
Frequency:
47 - 63 Hz
Weight:
4873.5 grams
Operating Temperature:
0 to +50 C
Dimensions (HxWxD):
355 x 370 x 85 mm
Installation:
Indoor Only
Mounting:
Surface
Mains Fuse:
630mA
Lock Fuse:
1.25A Quick Blow
Ripple Voltage:
<
200mV
Ordering Information
ACTpro 200 Door Station
ACTpro 200
Cabling Chart
From
To
Cable Restriction
ACTpro
200
Reader
Controller
ACTpro
200
Twisted
screen
pair Belden
9502 or
equivalent
or Cat5
8 core
screened
Maximum
1.4km
30m at 5 Volts
100m at 12 Volts
Door
Door
Door
Door
ACTpro 2000/3000 controllers and ACTpro 100
expanders require a 12 volts DC supply
ACT
pro
200 Schematic
ACT
pro
200
2000/3000
200
ACTpro 200 door station
with 3 Amp Monitered PSU
100
100
C
M
Y
CM
MY
CY
CMY
K
