ACTentry A5 Operating and Installation Manual
Rev 1.1
20 Second Programming Guide
1.Factory Default:
Step Keypad Entry
Operation
1
9999
Enter Programming Mode
2
Change Programming code
3
Exit programming
The ACTentry A5 may be returned to its
factory default settings at any time by
entering the programming mode and
pressing the tick ( ) key three times.
Note:
The default Programming code is 9999 and the default code for User 1 is 1234. ACT
recommends these codes are changed immediately after defaulting.
Step Keypad Entry
Operation
1
9999
Enter Programming Mode
2 0
Change
PIN
codes
3
Change Programming code
4
5214
Enter new 4-digit Programming code
5
Exit programming
2.Change Programming Code:
Example: Make 5214 the new
programming code
9999 0
5214
Step Keypad Entry
Operation
1
5214
Enter Programming Mode
2 0
Change
PIN
codes
3
1
Enter User Number 0-9
4 7529
4-digit
code
5
Exit programming
3.Change User Code:
Example: Assign code 7529 to User 1
5214 0 1 7529
4.Lost or forgotten programming code (Hardware factory Default)
If the Programming Code has been forgotten the unit maybe hardware factory defaulted. This will
set the programming code to 9999 and the code for user 1 to 1234.
1.
Remove the power from the ACTentry A5 Entry Panel.
2.
Remove link LK1.
3.
Apply power to unit (with LK1 removed).
4.
Replace link LK1.
5.
Programming Code is now set to 9999. Note: the
unit has been factory defaulted.
Note:
The ACTentry A5 will not operate correctly without LK1 in place. CALL led flashes amber rapidly
.
3