0
Change PIN code
1234 – User 1, 9999 - Programming Code
1
Set Toggle Mode
Off (Timed Relay)
2
Set Door Relay Time
5 seconds
5
Add User Card
6
Delete User’s Card
7
Delete Card Number
30
Card or PIN
On
31
Card and PIN
Off
32
Card and any PIN
Off
40
Permanent Backlight
On
41
Auto Backlighting
Off
80
Check PIN User
81
Check Card User
ACT5prox Operating and Installation Instructions
4
Programming Summary
Code
Function
Default
ACT5prox Operation
The ACT5prox is a simple, easy-to-use access control unit combining digital keypad and proximity
technology. The unit supports up to 50 users, each with a unique PIN code and proximity card/fob.
Each unit is contained in rugged polycarbonate housing, with stainless steel keys and potted
electronics, allowing for indoor and outdoor installation.
Keypad backlighting enhances the
ACT5prox functionality at night or in poor light conditions.
Programming the unit is achieved via the keys, LED and buzzer. Cards and PIN codes can be
programmed into the ACT5prox very quickly.
ACT recommends that Users and their associated
PIN and Card are recorded in the User List at the end of the manual.
Make copies of this sheet
and enter each Users details on it. This will allow users to be deleted later on, even if a card is lost or
a user forgets their PIN code.
Blank User List forms can be downloaded from the Resource
Centre on the ACT website, www.accesscontrol.ie
A valid card or PIN
will allow access through the ACT5prox unit. For maximum security, the unit
may be programmed to require all users to enter a PIN code after presenting a card.
Act 12pp ACT5prox:Act 20pp 1.1 English 14/11/2007 13:10 Page 4
