Acson international AAD20B, Operation Manual

Page: 5 / 29

5
HOW TO USE
1. Open the cover.

Remove the outer cover and the water tank cover.
2. Add moderate amount of water and essential oil.

The water level should not beyond the maximum water level indication.

Add few drops of essential oil into water.
Volume of Water Added Suggested Amount of Essential Oil Duration
50 ml 1-2 drops 30 min
– 1 hour
100 ml 2-4 drops 1
– 2 hours
200 ml 6-8 drops 3
– 4 hours
3. Connect to power supply.

Connect the adapter to the DC port at the bottom (Warning: Do not connect the adapter to the
AC power source at this moment).

Put the water tank cover and the outer cover in place.

Connect adapter to the AC power source and start it.

Press on/ off button, the unit will be in Standby Mode. Red LED lighted up when Standby Mode
is activated.
4. Activate the mist function.

Press the mist button for once, it will activate Continuous Mode. Blue light of Continuous Mode
will turn on. The unit will start to mist continuously until the water running out (estimated 4 hours
depending on the condition of surrounding environment).

Press it again, the unit will then switch to Interval Mode. Blue light of Interval Mode will turn on.
The unit will start to mist intermittently for 10 seconds, then stop the mist for 10 seconds, then
mist again. The cycle will go on.

Press it again, the unit will return to Standby Mode. Unit will stop misting.