ACS Control-System GmbH | www.acs-controlsystem.de | [email protected] | Eggenfelden | Germany
KAK / KLK
page 5 of 16
Safety function
– version GA with PNP switching output
The safety function defines the operation principle of the PNP switching output.
Maximum safety:
The output signal switches off, if the switching level is transgressed,
(liquid connection between electrode CH1 and reference electrode REF)
or the power supply fails.
Minimum safety:
The output signal switches off, if the switching level is underrun,
(no liquid connection between electrode CH1 and reference electrode REF)
or the power supply fails.
This respective safety function is set by a jumper inside the housing of the device.
Two-position-control
s (pump control)
– version GA with PNP switching output
The two-position-control function is always active.
Two-position-control
– minimum safety
Two-position-control
– maximum safety
