ACS Alcolock L OEM, Instruction Manual

Page: 16 / 28

INSTRUCTION MANUAL 12
SHARING A VEHICLE
Drivers with their own handset can operate the same vehicle without reprogramming
the ALCOLOCK L OEM device. All the custom settings are downloaded into the ECU
when a new handset is connected.
The handset can be changed with the motor on or off.
It is recommended to exchange handsets when the motor is off and the vehicle is
parked at a safe location.
1. Pinch the connector and pull the cable away from the handset
to disconnect.
WARNING! Do not pull on the handset cord. It requires just
a gentle squeeze on the release tab to disconnect.
2. If the motor is running, the ECU beeps every 15 seconds until
the handset is reconnected. If the motor is off the ECU will not
beep.
3. Reconnect the handset to the handset cable. It makes a click
sound if it is properly connected.
All the handset settings are downloaded to the ECU.
NOTE! If the handset is replaced while the motor is running,
a breath test is required.
Push and
Pull