Appendix A. Supported Card Types
The following table summarizes which values must be specified in the
SET_CARD_TYPE
command
for a particular card type to be used, and how the bits in the response to the
GET_ACR_STAT
command correspond with the respective card types.
Cyber-mouse Card
Type Code
Card Type
00
H
Auto-select T=0 or T=1 communication protocol
0C
H
MCU-based cards with T=0 communication protocol
0D
H
MCU-based cards with T=1 communication protocol
Document Title Here
Document Title Here
Document Title Here
AET60 Reference Manual
Version 1.7
Page 22 of 24
www.acs.com.hk
