ACR3901T-W Test Manual
Version 1.00
www.acs.com.hk
2.0. Bluetooth Mode Loopback program
This section introduces ACR3901T-W Reader using in Bluetooth Mode.
(It can connect USB adapter to charge the battery inside the reader)
Tools Requirement:
a. ACR3901T-W reader
b. ACOS3 Card
c. Bluetooth 4.0 USB Adaptor Dongle
d. PC & Bluetooth Mode loopback program “ACR3901U FCC Tool V2.00.exe”
Test Procedure:
1. Plug in the Bluetooth Adaptor into PC
(
For the first time to use, please install the driver, please refer to Section 5.0 –
Bluetooth Adaptor Driver Installation
)
2. Run “ACR3901U FCC Tool V2.00.exe” in folder “TestProgram/BT_Mode/”
3. The program will be shown as the picture below.
4. Select the suitable com port and then press “Connect”.