manualshive.com logo in svg

Acrosser Technology AR-V6002FL, User Manual, Page: 57 / 84

Share
Download
Acrosser Technology AR-V6002FL User Manual Download Page 57

 

  

Revision: 

1.23 

 

57

The source code of the Watchdog and GPIO APIs for accessing the SuperIO. 

2. sio_acce.h 

This file includes the declarations of the APIs and macro definitions. 

3. main.c 

The source code of the utility. 

4. Makefile 

 

On Windows platform: 

 

1. AR-B6002.h 

The header file of the APIs and macro definition. This header file is an aggregate 

header which includes APIs declarations and macros for CAN Bus, GPIO, Watchdog, 

and Power Subsystem. 

2. AR-B6002.lib 

The API library in static library format. This library is an aggregate library. It includes 

APIs for CAN Bus, GPIO, Watchdog, and Power Subsystem. 

3. AR-B6002.dll 

The API library in dynamically linked library format. This library is an aggregate library. 

It includes APIs for CAN Bus, GPIO, Watchdog, and Power Subsystem. 

4. subdirectory 

AR_B6002_LIB 

         The sample project by Microsoft Visual Studio 2010. 

 

4.2.3 Power Subsystem 

 

On Linux platform: 

 

1. pwr_acce.c 

The source code of the APIs for accessing the power subsystem. 

2. pwr_acce.h 

This file includes the declarations of the APIs and macro definitions. 

3. main.c 

The source code of the utility. 

4. Makefile 

 

On Windows platform: 

 

1.

 

AR-B6002.h 

Summary of Contents for AR-V6002FL





















































































Reviews:

No comments